|
This was really a minimalist project in terms of tools. Pretty much the only power tools I used were a small (junky) table saw, jig saw, miter chop saw, table router, and a DA sander from my car bodywork days. I took the lower seat slats to a buddy's to run through his planer. My wife loves it and it is very comfortable for two of us to sit on. I tell you all this just to show that this project does not need a full-on woodshop for good results. The only screws visible are the carriage bolts; any other screw had the counterbores filled with dowels then sanded smooth prior to stain. I just picked up a band saw last night so I'm itching to get going on my next one!
Thanks, Mike Zamalis
York, PA
|
Excellent plans. I used your design because of the limited space I had between the two trees to hang the swing. It worked out brilliantly. I used mahogany, maple, oak and pine to build the 6ft Plantation. I finished it off with a quart of marine grade varnish ($45.00). Friends and neighbor alike love using the swing, often falling asleep while listening to the waves lap up on to the shore. I am glad I was able to find your design. Thank you.
Bill Covington
Inkster, MI 48141
|
Over the years, I've tried many different swing stand styles...never found one I was completely happy with. Either too complex to build or not strong enough. I ran across the A-frame swing stand plans on this website and decided to give them a try. Several years and roughly 100 swing stands later...I'm still very happy and have made no modifications to the original plans. I've not had a single complaint from any of my customers!
Thanks for an easy to build, yet very sturdy A-frame stand!
Chris Cruze - Owner Cruze's Swings & Things LLC
|
I was looking for a swing design that would blend in and complement my existing wood deck and when I found your web site and seen the plantation swing, I immediately knew this was the swing I wanted to build.
I purchased your plans and found them to be very detailed and they provided me with all the necessary material information that I have found lacking in plans I have purchased from other sources.
I am very pleased with the end result and have received many compliments on our new swing and arbor. If I am ever in the need for additional plans, I will not hesitate to purchase from your company.
Thank So Much,
Dennis Buchanan
Henderson KY
I purchased your plans and found them to be very detailed and they provided me with all the necessary material information that I have found lacking in plans I have purchased from other sources.
I am very pleased with the end result and have received many compliments on our new swing and arbor. If I am ever in the need for additional plans, I will not hesitate to purchase from your company.
Thank So Much,
Dennis Buchanan
Henderson KY
|
|
This was my first and second built of this plan. I have built another one that is stained. This is a very good plan easy to build, One was for my new grandbaby. I plan to do more.
Thomas Birchett
Ringgold GA
Thomas Birchett
Ringgold GA
|
The plans were purchased mid-November, 2008 and the swing was built over this winter. This was my first woodworking project and I found the plans to be quite comprehensive. I was a little intimidated at first with the details but I quickly caught on and was very appreciative of the attention to specific detail. The swing is currently getting plenty of use and is very comfortable to sit on.
Harold Baker
Wiarton, Ontario
Harold Baker
Wiarton, Ontario
|
I recently completed building your Paul Vincent Swing as well as your A-Frame structure. I wanted to let you know how easy your plans were to follow and how much I absolutely love my new swing! Up until the time I began making the swing, I had at best minimal carpentry skills (just my 6th grade industrial arts training).
As an avid rocker, I thought an outdoor swing would be a great addition to my home, so I began searching the web for the "perfect swing". Once I overcame my initial shock at how much porch swings cost, I decided I could build one cheaper than I could purchase one. That's when I came across your site, so I opted to order the Paul Vincent Swing plan and went out and bought some power tools. A year later, I finally have my swing complete with a frame to hang it from. (and quite the little workshop going on in my cellar!) Nothing I could have bought can compare to the satisfaction of owning a beautifully designed swing that I made with my own two hands! I had no problems following the instructions, with the exception of having to learn some new terminology. I think the design of the swing is top quality and the finished product is absolutely gorgeous.
Thank you, Marie Briggs
Thank you, Marie Briggs
|
|
Hello,
I wanted to let you know how much we like your a frame design.
I could not find anything even close to this for sale. I'm so glad I found your site.
It's strong and looks great. I added a shelf for drinks.
Very handy. It took a while to get the angles right. Mine is not great but
a wood worker with more experience could do a better job.
Thanks, Phil Anderson
Thanks, Phil Anderson
|
|
Hello!
I thought you might enjoy looking at the swing I just finished using your plans. Every one that has seen it really likes it a lot, including my wife and myself. Thanks for the plans
D. Hartung
Here are the pictures of our glider swings. I modified and made a single seat to fit my 6'2", 250 lb frame. Love the results using your plans and now ordering plans for another project. I called several times for technical help and have been very pleased with the assistance and guidance to get me through my projects with great results. I would recommend you to anyone interested in trying your services. I don't believe anyone in the woodworking business could satisfy me as you have and I look forward to my next project.
Thanks, Tom Simpson-East Tennessee
2334 Dawson Cabin Rd.
Jacksonville, N.C.28540
Phone: (910) 938-9238
I thought you might enjoy looking at the swing I just finished using your plans. Every one that has seen it really likes it a lot, including my wife and myself. Thanks for the plans
D. Hartung
|
|
Here are the pictures of our glider swings. I modified and made a single seat to fit my 6'2", 250 lb frame. Love the results using your plans and now ordering plans for another project. I called several times for technical help and have been very pleased with the assistance and guidance to get me through my projects with great results. I would recommend you to anyone interested in trying your services. I don't believe anyone in the woodworking business could satisfy me as you have and I look forward to my next project.
Thanks, Tom Simpson-East Tennessee
|
The swing is great. I built it for by son and his family. Note the drink holders I made on the sides.
Bob "Bones" Fecht
Davie, FL.
Bob "Bones" Fecht
Davie, FL.
|
Thought you might want a picture of a completed A Frame
using your plans. Thank you very much.
John D. Singleton
John D. Singleton
|
Made one as a gift for our friend's campground. Everyone loved it and wants one too. Made another as a Christmas gift. It's a very comfortable swing.
Bradley E Smith
Harrison, OH
Bradley E Smith
Harrison, OH
More than satisfied with your service , your staff
were so helpful. It is a little difficult living in another
Country trying to find what you like, then trying to execute
The project. It is probably not as good a job as what a
Bloke would make but I enjoyed making the swing and making sure I sit
In it everyday.
Cheerio from Down Under
Chris Iddles, Australia
Cheerio from Down Under
Chris Iddles, Australia
I meant to tell you.
The CHILD SWING PLAN has been a hit.
Our 18 mo. Grand daughter loves it.
Thanks a lot for the plans. It was easy to build and everything worked out great.
Thanks again.
Mike Brodd
Thanks again.
Mike Brodd
2334 Dawson Cabin Rd.
Jacksonville, N.C.28540
Phone: (910) 938-9238
Copyright © 2008 Swingplans.com™
No material may be reproduced without written permission
Contact the Webmaster